This Accessory May Not Be Supported? Here’s The Real Fix!

Solution 1: Try different lightning cables

Lightning cables play an important role during the charging process, but any wear or tear sign might cause the problem. And in case the cable becomes old, then it is better to try to use a different cable. For that purpose, it is recommended that you use an original OEM or authenticated official Apple lightning cable only.

In the below-mentioned image, you can easily differentiate between ordinary and original lightning cable

Solution 2: Apply different power supply

The next step will be to check your power supply source. For that, you need to check your power adapter, as there might be some issue with it such as if there is any physical damage sign, then it might not supply power to the device, So, first of all, check if you face the same issue with any other similar power adapter.  In case the issue persists due to power adapter then you are required to either change your adapter or try to charge with a different power supply source such as a power bank, a wall plug, your computer or through your MacBook.

Solution 3: Update the iOS

If the above methods do not resolve your concern and the problem persists, you should check if any software update is pending. If yes, then you should immediately opt for updating your iOS software, so that, if there is any bug error, it can get rectified. The software update also provides extra protective features. Here are a few ways by which you can update your iPhone software.

Method A: Wirelessly

In order to update device wirelessly, first of all connect your device to the Wi-Fi connection > Go to Settings > click on General option > Then Click on Software Update > ‘Download and Install’ > Select Install > Once you are done with the process, it will ask to enter the passcode, enter it (if any) and finally confirm it.

Method B: With iTunes

If updating wireless does not go well then you can go for a manual update with iTunes on your computer, for that:

Connect your PC to the Wi-Fi or Ethernet then, first of all, you are required to update your iTunes to the latest version by visiting (https://support.apple.com/en-in/HT201352)

After that Connect your device to the PC or laptop > click on iTunes > Then Select your device > Go to Summary> Click on ‘Check for updates’ > Click on Download > Update

And Enter the passcode (if any)

Note: From time to time you should keep on updating your device software. This will keep your iOS device alert for unforeseen errors, prepare it to fix any bug issue, equip it with protection features and avoid future errors like this.

Λύση 4: Καθαρίστε τη θύρα

The next part check point will be to check and clean your charging port, as, with the passage of time and usage, dirt and dust occupy space which might be causing an error during the charging process. Now the question arises, How to clean the port?

A. Removing dust

You can remove the dust out of the port using any of these: Paper clip, SIM card tool, a bobby pin, a toothpick or a small needle.

Now first of all switch off the phone to avoid any damage. Once your phone screen is blacked out, Take a paper clip > bend it straight > then insert into the data port > Now Scrap the sides and the bottom area.  > Finally, blow air at the data port. This will help remove the extra dirt accumulated there

With the help of pushpin or paper clip, try to clean the port of your device properly and clean out the pocket lint or any debris from the charging port.

B. Removing corrosion

When gold pin of the charger, when comes in contact with moisture, gets corroded. So, to avoid or remove this error you are required to follow the below-mentioned steps:

For cleaning, pick up a bent clip or alternatively, you can also use a Toothbrush.

Now scrap off the greenish corrosion out of the device’s port.

Then Clean and wipe off with the help of a small amount of petrol (Or alcohol) and after that use a dry cloth to clean it.

Λύση 5: Έκδοση υλικολογισμικού με iOS

In case even after cleaning the port the problem appears then it seems like there is some firmware issue which is causing the error. So in order to resolve the issue of the accessory may not be supported error message here is a quick trick that you can follow.

1. For that, first of all, you are required to connect your device to the charger and power adapter to the source.

2. Then, when the error message appears, just dismiss it and Turn the Airplane mode ON.

3. After that, you need to turn off the device by pressing the sleep and wake button together till the screen turns black and a slider appears. Now, wait for few minutes say 2-3 minutes.

4. Once you are done with, switch ON the device by holding down the sleep and wake button again, then, turn airplane mode off

Following these steps will most likely resolve your accessory may not be supported issue.

Note: Apple Support:

After going through the methods stated above, and following each step carefully we are sure that the iPhone this accessory may not be supported error message will not appear. In case, unfortunately, the error message still keeps on flicking on the device screen, then you can contact the Apple Support team. They are always there to assist you at the time of need. Follow the link below to contact them: